CHB Worm Gear Boxes
The new CHB worm gearboxes of Chiaravalli Trasmissioni SPA have been produced to satisfy the market that require a product in dimensions and construction without changing the existing drawings and to guarantee non stop of their spare parts.
Chiaravalli designed this new product by improving and introducing better technical modifications to offer easier application of the groups to the different assembling configurations so that by offering a better service in flexibility and delivery time.
Starting from these considerations , we have a gearbox with a motor mounting flange that is separable from the housing which incorporate the oil seal; in this way we avoid any risk of damaging the oil seal in case of replacement of the input flange and the O-Ring can be eliminated.All the aside covers, swinging and with feet, have O-Rings instead of traditional flat gaskets. The sizes 03-04-05 allow the rotation of the feet without disassembling them; furthermore the versions with swinging aside covers allow the lateral flanges to be fitted on both sides with simple fixing screws.The worm screw has a ZI involute profile: with this worm-wheel coupling we shall get a better performance with a temperature reduction.
The gearboxes and motors are painted with RAL 9022 aluminium colour epoxy powder to protect the parts from oxidation and against micro—blowholes that can come during the pressure of die-castings.
The CHTPC pre-stage gears (in the catalogue of CHM) can also be mounted with this range, obtaining a gear ratio up to 1:300. For bigger reductions is possible to have two gears together using an appropriate kit.
Products charakteristics:
•Motor mounting flange that is separate from the housing which incorporates the oil seal, this way any risk of damaging the oil seal is avoided during replacement of the input flange and the O-Ring can be eliminated
•All the side covers have O-Rings instead of traditional flat gaskets
•The sizes 03-04-05 allow the rotation of the feet without disassembling them
•The versions with standard side covers allow the lateral flanges to be fitted on both sides with simple fixing screws
•The worm screw has a ZI involute profile: with this worm-wheel coupling giving better performance with a temperature reduction
•The units are painted with RAL 9022 aluminium colour epoxy powder to protect the parts from oxidation and against micro—blowholes that can come during the pressure of die-castings
Torque max - 8-490 Nm.
Power – 0,09- 4 KW;
Ratio – 7-2800;
!!!
You can search by the gearbox dimensions, then you will be provided with all possible options.
.jpg)