Flat belts
Flats belts have the following features and characteristics:
• High flexibility
• Dimensional accuracy
• High speed
• Energy efficiency
• Low noise and vibration
• Low maintenance
• Good chemical and ozone resistance
• High friction surface
We offer services for gluing flat power transmission belts and conveyor belts.
Flat belts
You can search only on request.
SERIES | FEATURES AND USE AREAS |
P | suitable for both light and medium drives: power operated tools, auxiliary drives in the textile and mechanical industry, etc. Installed as conveyor belts in the packaging and graphic arts industries. Antistatic. |
Z | suitable for both medium and high horsepower drives; extremely abrasion resistant; oil, grease proof; antistatic. Designed to perform well in difficult working conditions. Recommended for: pumps, ventilators, mixers, rolling-mills,turbines saws for marble, chippers, etc. |
T | specially designed for tangential drives in the textile industry. The high-quality features are: rectilinear and quiet running, antistatic, optimum grip, energy saving, resistance to abrasion, heat, oil, dust, are obtained in every field. Suitable for multiple drives. |
T-E | the T-E 10/20 and T-E 30/30 belts are particularly suitable as tangential drive belts in the textile industry or as power transmission or live roller drives in any other industry (e.g. in the paper and tissue processing industry, the wood industry etc.). |
DG | these double rubber faced belts have special elastomers which maintain continuous frictional values. Antistatic. Suitable for: folder-gluer machines, tube winders, post office machinery and in the graphic arts industry, multiple drives, etc. The MF elastomer cover offers the highest grip. |
DG-E |
the DG-E 10/30 and DG-E 10/40 belts are suitable for folder-gluers in the cardboard industry, as an alternative to the traditional nylon belts of the DG series. |
DG HS | belts with very high performance elastomer cover. Suitable for folder-gluers at very high speed. |
LT | belts with chrome leather driving surface. Contrary to belts with synthetical covers, LT belts are recommended for all drives subject to violent over loads since the leather driving surface allows temporary slipping without burning. Suitable for: conic drives, drives with belt-shifters, chippers, crushers, paper mills, etc. Suitable for cross drives. |
LL | belts with double chrome leather covers. The same characteristics and applications envisaged for the LT series apply also to the LL series. Suitable for multiple drives and cross drives. |
1st table
Type |
Top surface | Traction core | Driving surface |
Total thickness
|
Weight | Min. diameter (1) | Pull for 1% elongation | Tensile strenght | Max. temperature | |||||
material | colour |
coefficient |
material | material | colour | coefficient of friction on steel |
mm | kg/m² | mm | N/mm | N/mm | C | C | |
Belts with polyester traction core |
||||||||||||||
T-E 10/20 | elastomer | orange | 0,7 | polyester | elastomer | black | 0,7 | 2,2 | 2,5 | 25 | 10,0 | 90 | -20 | 70 |
T-E 30/30 | elastomer | orange | 0,7 | polyester | elastomer | black | 0,7 | 3,0 | 3,5 | 50 | 30,0 | 250 | -20 | 70 |
DG-E 10/30 | elastomer | orange | 0,7 | polyester | elastomer | orange | 0,7 | 3,0 | 3,5 | 30 | 10,0 | 90 | -20 | 70 |
DG-E 10/40 | elastomer | orange | 0,7 | polyester | elastomer | orange | 0,7 | 4,0 | 5,0 | 40 | 10,0 | 90 | -20 | 70 |
T series |
||||||||||||||
T0 | elastomer | anthracite | 0,7 | polyamide | elastomer |
anthracite | 0,7 | 1,4 | 1,5 | 20 |
2,0 | 80 |
0 | 100 |
T1 | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 | 1,7 | 1,8 | 25 | 5,0 | 200 | 0 |
100 |
T1R | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 | 2,1 | 2,3 | 25 | 5,0 | 200 | 0 | 100 |
T2 | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 | 2,3 | 2,6 |
60 | 7,5 | 300 | 0 | 100 |
T2R | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 | 3,2 | 3,6 |
75 | 7,5 | 300 | 0 | 100 |
T3 | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 | 2,6 | 2,8 | 100 | 10,0 | 400 | 0 | 100 |
T3R | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 | 3,4 | 3,7 |
100 |
10,0 | 400 | 0 | 100 |
T4 | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 | 3,1 | 3,4 |
150 |
15,0 | 600 |
0 | 100 |
T4R | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 | 3,9 | 4,5 | 150 |
15,0 | 600 | 0 | 100 |
T4S | elastomer | anthracite | 0,7 | polyamide | elastomer | anthracite | 0,7 |
5,1 | 5,9 | 150 | 15,0 | 600 | 0 | 100 |
T1-T | elastomer | black | 0,7 | polyamide | elastomer | yellow | 0,7 | 1,8 |
2,1 | 25 | 5,0 | 200 | 0 | 100 |
T2-T | elastomer | black | 0,7 | polyamide | elastomer |
yellow | 0,7 | 2,7 | 3,1 | 60 | 7,5 | 300 | 0 | 100 |
T3-OE | elastomer | black | 0,7 | polyamide | elastomer |
yellow | 0,7 | 2,7 | 3,0 | 90 | 10,0 | 400 | 0 | 100 |
T3-T | elastomer | black | 0,7 | polyamide | elastomer |
yellow | 0,7 | 2,9 | 3,4 | 100 | 10,0 | 400 | 0 | 100 |
T4-T | elastomer | black | 0,7 | polyamide | elastomer |
yellow | 0,7 | 3,4 | 3,7 | 150 | 15,0 | 600 | 0 | 100 |
2nd table
Type | Top surface | Traction core | Driving surface |
Total thickness
|
Weight | Min. diameter (1) | Pull for 1% elon gation | Tensile strenght | Max. tempe rature | |||||
material | colour |
coefficient |
material | material | colour | coefficient of friction on steel |
mm | kg/m² | mm | N/mm | N/mm | C | C | |
DG HS series |
||||||||||||||
DG1/15 HS | elastomer | orange | 0,7 | polyamide | elastomer | orange | 0,7 | 1,6 | 1,8 |
20 |
5,0 | 200 |
0 |
100 |
DG1/30 HS |
elastomer | orange | 0,7 | polyamide | elastomer | orange | 0,7 | 3,0 | 3,4 | 30 | 5,0 | 200 |
0 |
100 |
DG1/40 HS |
elastomer | orange | 0,7 | polyamide | elastomer | orange | 0,7 | 4,0 | 4,6 |
40 | 5,0 | 200 |
0 |
100 |
DG2/30 HS |
elastomer | orange | 0,7 | polyamide | elastomer | orange | 0,7 | 3,2 | 3,7 |
40 | 7,5 | 300 |
0 |
100 |
DG2/40 HS | elastomer | orange | 0,7 | polyamide | elastomer | orange | 0,7 | 4,0 | 4,8 | 50 | 7,5 | 300 | 0 | 100 |
DG2/60 HS | elastomer | orange | 0,7 | polyamide | elastomer | orange | 0,7 | 5,5 | 6,3 | 60 | 7,5 | 300 | 0 | 100 |
DG3/40 HS | elastomer | orange | 0,7 | polyamide | elastomer | orange | 0,7 | 4,0 | 4,3 | 100 | 7,5 | 300 | 0 | 100 |
DG series | ||||||||||||||
DG1/15 | elastomer | green | 0,7 | polyamide | elastomer | green | 0,7 | 1,6 | 1,8 | 20 | 5,0 | 200 | 0 | 100 |
DG1/30 | elastomer | green | 0,7 | polyamide | elastomer | green | 0,7 | 3,0 | 3,4 | 30 | 5,0 | 200 | 0 | 100 |
DG1/40 | elastomer | green | 0,7 | polyamide | elastomer | green | 0,7 | 4,0 | 4,6 | 40 | 5,0 | 200 | 0 | 100 |
DG2/20 | elastomer | green | 0,7 | polyamide | elastomer | green | 0,7 | 2,4 | 2,8 | 40 |
7,5 | 300 |
0 |
100 |
DG2/30 |
elastomer | green | 0,7 | polyamide | elastomer | green | 0,7 |
3,2 | 3,7 | 40 | 7,5 | 300 | 0 | 100 |
DG2/40 | elastomer | green | 0,7 | polyamide | elastomer | green | 0,7 | 4,0 | 4,8 | 50 | 7,5 | 300 | 0 | 100 |
DG2/60 | elastomer | green | 0,7 | polyamide | elastomer | green | 0,7 | 5,5 | 6,3 | 60 | 7,5 | 300 | 0 | 100 |
DG1/45 MF | elastomer | purple | 1,0 | polyamide | elastomer | green | 0,7 | 4,5 | 5,1 | 50 | 5,0 | 200 | 0 | 100 |
DG1/45 MF | elastomer | purple | 1,0 | polyamide | elastomer | green | 0,7 | 6,5 | 7,1 | 75 | 7,0 | 300 | 0 | 100 |
P series | ||||||||||||||
P0 | polyurethane | green | 0,3 | polyamide | elastomer | green | 0,6 | 0,9 | 1,0 | 15 | 2,0 | 80 | 0 | 100 |
PR0 | polyurethane | green | 0,3 | polyamide | polyurethane | green | 0,3 | 1,0 | 1,1 | 20 | 3,0 | 120 | 0 | 100 |
P1 | polyurethane | green | 0,3 | polyamide | elastomer | green | 0,6 | 1,4 | 1,5 | 25 | 5,0 | 200 | 0 | 100 |
P2 | polyurethane | green | 0,3 | polyamide | elastomer | green | 0,6 | 2,1 | 2,3 | 50 | 7,5 | 300 | 0 | 100 |
Z series |
||||||||||||||
Z1 | polyurethane | black | 0,3 | polyamide | elastomer | black | 0,6 | 1,4 | 1,5 | 25 | 5,0 | 200 | 0 | 100 |
Z2 | polyurethane | black | 0,3 | polyamide | elastomer | black | 0,6 | 2,3 | 2,8 | 60 | 7,5 | 300 | 0 | 100 |
Z3 | polyurethane | black | 0,3 | polyamide | elastomer | black | 0,6 | 2,6 | 3,1 | 100 | 10,0 | 400 | 0 | 100 |
Z4 | polyurethane | black | 0,3 | polyamide | elastomer | black | 0,6 | 3,4 | 3,9 |
150 | 15,0 |
600 | 0 | 100 |
Z6 | polyurethane | black | 0,3 | polyamide | elastomer | black | 0,6 | 3,7 | 4,2 | 200 | 20,0 | 800 | 0 | 100 |
Z9 |
polyurethane | black | 0,3 | polyamide | elastomer | black | 0,6 | 4,9 | 5,8 |
300 |
30,0 |
1200 | 0 | 100 |
Z12 | polyurethane | black | 0,3 | polyamide | elastomer | black | 0,6 | 5,6 | 6,3 | 400 |
40,0 | 1600 | 0 | 100 |
LT series |
||||||||||||||
LT0R |
polyurethane | red | 0,3 |
polyamide | leather | antracito | 0,4 |
2,4 | 2,7 | 30 | 3,0 |
120 |
0 | 80 |
LT1 |
polyurethane | red | 0,3 |
polyamide | leather | antracito | 0,4 |
2,5 | 2,5 | 50 |
5,0 | 200 | 0 | 80 |
LT2 | polyurethane | red | 0,3 |
polyamide | leather | antracito | 0,4 |
3,1 | 3,1 | 75 |
7,5 | 300 | 0 | 80 |
LT3 |
polyurethane | red | 0,3 |
polyamide | leather | antracito | 0,4 |
3,3 | 3,4 | 100 |
10,0 |
400 | 0 | 80 |
LT4 | polyurethane | red | 0,3 |
polyamide | leather | antracito | 0,4 |
3,8 | 4,0 | 150 | 15,0 |
600 | 0 | 80 |
LT6 | polyurethane | red | 0,3 |
polyamide | leather | antracito | 0,4 |
4,4 |
4,6 | 200 |
20,0 | 800 | 0 | 80 |
LT9 | polyurethane | red | 0,3 |
polyamide | leather | antracito | 0,4 |
5,6 | 5,9 | 300 | 30,0 | 1200 | 0 | 80 |
LT12 | polyurethane | red | 0,3 |
polyamide | leather | antracito | 0,4 |
6,1 | 6,8 | 400 | 40,0 | 1600 | 0 | 80 |
LL series |
||||||||||||||
LT0 L | leather | anthracite | 0,3 | polyamide | leather | antracito | 0,4 | 3,2 | 3,2 | 50 | 2,0 | 80 | 0 | 80 |
LT1 | leather | anthracite | 0,3 | polyamide | leather | antracito | 0,4 | 3,2 | 3,2 | 50 | 5,0 | 200 | 0 | 80 |
LT2 | leather | anthracite | 0,3 | polyamide | leather | antracito | 0,4 | 4,0 | 4,1 | 75 | 7,5 | 300 | 0 | 80 |
LT3 | leather | anthracite | 0,3 | polyamide | leather | antracito | 0,4 | 4,2 | 4,4 | 100 | 10,0 | 400 | 0 | 80 |
LT4 | leather | anthracite | 0,3 | polyamide | leather | antracito | 0,4 | 4,8 | 5,0 | 150 | 15,0 | 600 | 0 | 80 |
LT6 | leather | anthracite | 0,3 | polyamide | leather | antracito | 0,4 | 6,0 | 6,0 | 200 | 20,0 | 800 | 0 | 80 |
LT9 | leather | anthracite | 0,3 | polyamide | leather | antracito | 0,4 | 7,2 | 7,6 | 300 | 30,0 | 1200 | 0 | 80 |
(1) The above mentioned values depend on the running speed. The data of this table have been formulated under normal environment conditions. They are subject to alteration without notice. |