Lt En Ru

My cart

Number of items: 0 
International Agricultural Exhibition “Ką pasėsi... 2018” on March 22-24
2018 03 15
New office in Vilnius
2015 07 15

 New office in Vilnius

All news

Angular Contact Ball Bearings


The main feature of these bearings is ability to conceive radial and axial load in one direction.
In the production, there are bearings with four different value of contact angle: 15° (suffix С), 25° (suffix А5), 30° (suffix А), and 40° (suffix В). The bigger contact angle, the bigger axial load can be taken by the bearing. Smaller contact angle is made for high speed working mode. Usually, they are mounted in an assorted way, with selected exact clearance space between bearings. Basically, the separators are made from steel, but in extra fine bearings with 30° contact angle, we are using separators made from polyamide plastic.
Thrust ball bearings come in two designs:  single direction and double direction.  The single direction design comprises two rings, referred to as shaft and housing washers and a single ball and cage assembly. The double direction design, on the other hand, comprises three washers and two ball and cage assemblies. The ball and cage assemblies of the double direction type are separated by the shaft washer.

Oil selectionLiterature

Bearings search

You can search by the code fragment, manufacturer, or bearing dimensions, then you will be provided with all possible options.

Code of the bearing

Enter code of the bearing, code fragment, or manufacturer.

Bearing dimensions

Inside (d) mm

Outside (D) mm

Width (B) mm
Enter bearing dimensions, or part of its dimensions