| User's Problem |
Requirements |
Molykote® Solution |
| Linear Motion Guides |
| High lubricant usage with oil lubrication |
Coat with AF Coating then apply thin film of DX paste |
3402 C+Dx |
| High wear due to intermittent operation or by small movement |
Dry film lubricant for short travel distances |
3402C |
| Insufficient accuracy as a result of surface rolling and wear |
Apply both lubricants due to increased loads |
3402 C+Dx |
| Apply both lubricants due to high loads and medium speeds |
3402 C+Longterm 2 Plus |
| Linear Sliding Guides |
| Stick-slip and damage during assembly and running-in |
Adhesive pretreatment assembly paste |
G-N PLUS |
| Pretreatment assembly paste |
G-RAPID PLUS |
| Multi-purpose grease with MoS2 |
BR2 PLUS |
| Extreme pressure MoS2 grease |
Longterm 2 Plus |
| Scuffing, scoring, high wear, short life due wet environment |
Multi-purpose moderate load and food grade (NSF H1) grease |
G-4500 |
| Synthetic grease for high loads on metals |
G-4700 |
| General purpose, semi-synthetic grease |
PG-75 |
| White synthetic grease with solid lubricants for extreme pressure |
EM-30L |
| Silicone grease for plastics with wide temperature range |
33 |
| Short life and lubrication intervals owing to wet environment |
White long-life and water-resistant grease |
Longterm W2 |
| Extreme pressure and water-resistant grease |
Longterm 2 Plus |
| Fretting corrosion |
White, extreme pressure solid lubricant paste |
DX |
| Adhesive lubricant against fretting corrosion |
G 67 |