| User's Problem | Requirements | Molykote® Solution |
| Linear Motion Guides | ||
| High lubricant usage with oil lubrication | Coat with AF Coating then apply thin film of DX paste | 3402 C+Dx |
| High wear due to intermittent operation or by small movement | Dry film lubricant for short travel distances | 3402C |
| Insufficient accuracy as a result of surface rolling and wear | Apply both lubricants due to increased loads | 3402 C+Dx |
| Apply both lubricants due to high loads and medium speeds | 3402 C+Longterm 2 Plus | |
| Linear Sliding Guides | ||
| Stick-slip and damage during assembly and running-in | Adhesive pretreatment assembly paste | G-N PLUS |
| Pretreatment assembly paste | G-RAPID PLUS | |
| Multi-purpose grease with MoS2 | BR2 PLUS | |
| Extreme pressure MoS2 grease | Longterm 2 Plus | |
| Scuffing, scoring, high wear, short life due wet environment | Multi-purpose moderate load and food grade (NSF H1) grease | G-4500 |
| Synthetic grease for high loads on metals | G-4700 | |
| General purpose, semi-synthetic grease | PG-75 | |
| White synthetic grease with solid lubricants for extreme pressure | EM-30L | |
| Silicone grease for plastics with wide temperature range | 33 | |
| Short life and lubrication intervals owing to wet environment | White long-life and water-resistant grease | Longterm W2 |
| Extreme pressure and water-resistant grease | Longterm 2 Plus | |
| Fretting corrosion | White, extreme pressure solid lubricant paste | DX |
| Adhesive lubricant against fretting corrosion | G 67 | |