User's Problem | Requirements | Molykote® Solution |
Difficult dismantling owing to corrosion and rust | 5 in 1 | Multi gliss |
Penetrating oil | Supergliss | |
Contaminated components | Metal/Brake cleaner | Metal Cleaner |
Stick-slip and damage during assembly and running-in | Adhesive pretreatment assembly paste | G-n Plius |
Pretreatment with solid lubricants | G-Rapid Plus | |
Corroded components due to corrosive environment | Adhesive copper paste | Cu-7439 plus |
Seized or broken bolted connections | White assembly paste | D |
Pretreatment with solid lubricants | G-Rapid Plus | |
Consistent assembly torque | 1000 | |
High temperature threads (nickel alloys) | P 37 | |
Wear, pitting and noise | MoS2 additive for motor and gear oils | A |
Corrosion Dry, transparent corrosion protector | Metal Protector Plus | |
Difficult applications which are not equipped with grease nipples | Low viscosity solid lubricant dispersion | Omnigliss |
Short life and lubrication intervals owing to wet environment | Adhesive lubricant dispersion | Polygliss-N |
Welding spots on welding tools and metal surfaces | Transparent, water-based fluid | S-1010 |
Sticking of molded components | Non silicone release fluid | S-1011 |
Dust contamination in electrical components | Electrical contact cleaner | S-1002 |
Damage of drills and components | Cutting fluid | S-1013 |
Sticking of rubber, metal and plastic parts | Silicone release agent and lubricant | Separator Spray |
Repair damaged galvanized surfaces | Corrosion protective dry film coating | L-0500 |